Dalian Jinzhou Tengda Metal Components Co.,Ltd.

腾达钣金件

News

Product

Hot key

Contact us

Dalian Jinzhou Tengda Metal Components Co.,Ltd.

P.C:116100 

TEL:0411-87840058

         0411-87840166 

FAX:0411-87840059 

Add:No.558, Jinwan Road, Jinzhou District, Dalian, Liaoning

URL:en.dl-td.com

Common sheet metal materials

Your current location: Home >> News >> Company news

Common sheet metal materials

Release date:2017-08-27 Author:Source Network Click:


Dalian sheet metal parts widely used in the electronics industry include:


1. Ordinary cold-rolled plate SPCC


SPCC refers to the steel ingot through the cold rolling mill continuous rolling into the required thickness of steel coil or sheet material. SPCC surface without any protection, exposed to the air can be easily oxidized, especially in humid environments accelerated oxidation, the emergence of dark red rust, the use of the surface to paint, plating or other protection.


2. galvanized steel SECC


SECC substrate for the general cold-rolled coil, galvanized in the continuous galvanized line after degreasing, pickling, electroplating and various post-processing process, which became electrogalvanized products. SECC not only has the general cold-rolled steel mechanical properties and approximate processibility, but also has excellent corrosion resistance and decorative appearance. In the electronics, home appliances and furniture market has great competition and substitutability. For example, the computer chassis commonly used is SECC.


3. Hot dip galvanized steel SGCC


Hot-dip galvanized steel coil refers to the hot-rolled pickling or cold-rolled semi-finished products, after cleaning, annealing, immersed in a molten zinc bath temperature of about 460 ° C, and the steel plate coated with zinc, and then quenched Leveling and chemical treatment. The SGCC material is harder than the SECC material with poor ductility (avoiding deep draw design), a thicker zinc coating and poor weldability.


4.Stainless steel SUS301


Cr (chromium) content lower than SUS304, corrosion resistance is poor, but after cold work can get good tensile strength and hardness, better elasticity, and more for the leaf spring and anti-EMI.


5.Stainless steel SUS304


One of the most widely used stainless steels, due to Ni-containing steels, is more corrosion-resistant and heat-resistant than Cr-containing steels and possesses very good mechanical properties, no heat treatment, and no elasticity.

大连钣金件


This article URL:http://en.dl-td.com/news/357.html

Related tags:大连钣金件

Recently Viewed:

QR code

Scan QR code

share it One key to share
Welcome to leave a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact
Phone
Phone
Email
Email
Address
Address